3–10
975-0347-01-01
Materials
The following checklist is a general list of required materials.
•
Four corrosion-resistant fasteners sized #10 or larger for mounting the
inverter
•
Copper DC input cable as calculated in Table 3-1 on page 3–6
•
Two 1/4 inch (6 mm) ring terminals sized for the cable diameter to
connect the DC cables to the DC cabling terminal
•
Lugs and terminals to connect the DC cables that connect to the
battery, Disconnect/Battery Selector switch and fuse holder(s)
•
DC fuse(s) as calculated in “Calculating Fuse/Circuit Breaker Size”
on page 3–8 and fuse holder(s)
•
Copper chassis ground cable as calculated in Table 3-2 on page 3–7
•
Ring terminal (appropriately sized to connect copper cable to chassis
ground screw) that meets the following specifications:
•
#10 stud size (hole diameter)
•
UL/CSA approved
•
copper
•
tin-plated
•
Battery isolator (if connecting to a multiple-battery system)
•
Disconnect/Battery selector switch
•
Alternator controller
1
•
High-output alternator
1
1.Consult Appendix B, “Battery Types” and Appendix C, “Alternators and Charging
Systems” to determine whether you need these components.
Duracell1000.book Page 10 Friday, September 7, 2007 1:47 PM
Содержание inverter 1000
