DURA Bike locker DL1, Руководство по сборке

Страница: 5 / 8

10. Upper Lock Bar : The lock bars can be attached at this point. Link the upper lock bar you slid into
the door (step 12) to the CAM using (1) pan head screw (#10-24 x 1” zinc plated), (1) nylon
washer (.5 OD x .266 ID x .06 THK, this get sandwiched between the CAM and lock bar), and (1)
nylock nut.
11. Lower Lock Bar : Now install the lower lock bar by sliding it through the guide on the bottom of
the door then link it to the CAM using (1) pan head screws (#10-24 x 1” zinc plated), (1) nylon
washer (.5 OD x .266 ID x .06 THK, these get sandwiched between the CAM and lock bar), and (1)
nylock nut.