DURA Bike locker DL1, Руководство по сборке

Страница: 3 / 8

4. Back Panel : The back panel should be installed next. Stand up the panel and position it on the
other end of the wall and attached it using (5) pan head screws. You should now have a frame,
a wall, and a back panel standing ready for the next wall.
5. Interior Wall : Locate a galvanized (non-painted) interior wall. Position the wall between the
frame and back panel you have already setup. Now insert a splice plate between the frame and
wall (this links the lockers in the bank giving them more stability/rigidity) and secure the wall to
the frame using (5) pan head screws. Next secure the wall to the back panel using (5) pan head
screws, insuring both splice plates are aligned and sandwiched between the panels.
6. Top : The locker top can now be installed (we recommend using two people to carry these
panels as they are very heavy) lift the top over the frame, back panel, and walls you have
assembled in the previous steps. Slide a splice plate between the top and wall (this supports the
top of the next locker in the bank). Now from inside the locker attach the frame, back panel,
and walls to the top using (24) pan head screws; (6) for each wall, (6) for the frame and (6) for
the back panel.