Oxford Trellis
4
Insert left and right trellis panels (from Page 3) into 65" corner post (part 1).
In order for trellis to look
symmetrical, top/bottom cross rails, horizontal slats and bent tops must be fully inserted into 59½" left and
right posts.
Using two ¾" screws per outer post and four ¾" screws for corner post, fasten together trellis.
Using PVC, super or crazy glue, apply glue to inner corners of each 2" sq. post cap and place on top of each
post.
INSTALLATION
In desired location set trellis in place and mark where ground anchors will need to be inserted. Using a block of
wood to protect ground anchors; pound each anchor into place. (If ground is extremely hard, loosen or soak
soil before inserting ground anchors). Set trellis into ground anchors.
If combining with Model# 11187 Corner Slat Planter to make a planter trellis, use a straight blade screwdriver
to pop off three 2" sq. post caps and slide trellis over the planter legs.
