Greenfield Potting Bench
4
Insert three ⅞" x 3” x 20¼” table/shelf rails
(part 7) into table support of back panel.
Insert eleven ⅞" x 3” x 20¼” table/shelf rails
(part 7) into shelf support of back panel.
Insert two 1½" x 4" x 20¼” side rails (part 6)
into back right and back left post. Insert free
ends of all rails into corresponding holes of
front panel.
Using four ¾" screws per post, screw
together potting bench. Be sure that all parts
are fully inserted into posts before securing.
Lay out three ½" x 5½" x 43” table top rails
(part 12). Using six 1¼” screws per piece,
insert screws through two ⅞" x 1½" x 16½"
table brace (part 13). Fasten screws to screw
pilot holes of the three table top rails. Using
super glue tube, apply glue to inner edges of
16½" table top end cap (part 14). Slide end
cap onto ends of table top. Using a file or
sandpaper, file sharp corners of end cap.
5
6
7
