FINISHING TOUCHES INSTALLATION
Apply glue to the inside edges of the 5 3/8” end caps. Push caps on straight; do not slide from
ends. Apply glue to inside edges of 2 x 2” post caps for arbor posts, the arrowhead caps for on top
of 1 x 1 square rails and the 7/8 x 1 ½” end caps for top cross rails on arbor top. Arbor is now
ready for installation on large planter boxes.
INSTALLATION
With straight blade screwdriver, carefully pop off two of the 2 x 2” caps on the long side of each
planter box. Set completed arbor over planter legs.
If the arbor is located in a windy area, we recommend that you use the four ¾” screws and caps to
fasten arbor to planters. Drill small pilot hole in each of the four arbor posts and fasten.
If you encounter missing or defective parts, please contact manufacturer direct at
toll free # below.
Dura-Trel, Inc. ~
PO Box 122, Sheboygan Falls, WI 53085 ~ Toll Free 877-258-6020
