Closer Bracket
Closer Bracket
Connecting Pin
3/16” Dia. X 3/4” long
Push Retainer
Door Bracket
Door Bracket Pin
Hold Open Washer
Instructions
Door Header
Closer Bracket Screws
(#10 x 1” Panhead Phillips
Sheet Metal Screw)
Door Jam
Door
1. Locate and pre-drill the four (4) factory marked Positions with a 9/64” drill. Attach the Closer Bracket to the Door
oriented as shown with four (4) Closer Bracket Screws.
2. Slide the Hold Open Washer on to the Shaft of the Door Closer as shown.
3. With the Hold Open Washer on the Shaft slide the Closer Bracket Connecting Pin through the Closer Bracket and
through the shaft of the Door Closer, then using a pair of pliers squeeze the Push Retainer on to the Pin.
4. With the Door Closer attached to the Closer Bracket, insert the Door Closer into the Door Bracket and attach it with
the Door Bracket Pin.
NOTE:
The Closer is in
Maximum
latching power position with (pin in Hole 1). If less power is required, hold door
open with Hold Open Washer, pull Door Connecting pin and relocate in Hole 2.
Closer Bracket
Connecting Pin
Door Bracket Pin
Push Retainer
Door Closer Components and Instructions
Hole 1
Hole 2
Slower
Faster
