Dupray Hill Injection, Инструкция по эксплуатации, Страница: 9 / 44

HOW TO USE YOUR STEAM CLEANER
1. Remove the water tank cap (1) and fill the tank with up to a maximum of 0.8 gal / 3 L of regular tap water.
Securely replace the water tank cap. The refilling bottle (31) is 30oz / 900ml.
2. Unravel completely the electrical cord (9). Connect the electrical cord (31) to a 15 or 20 amp 110V/120V power outlet.
(make sure the circuit is not already used by another high wattage appliance).
3. Turn ON the main power switch (2A), press the power button (2), and then press the boiler activation button (3).
The SteamReady™ indicator (5) will light up when the steam cleaner is ready to use, after approximately 7 minutes of heat up time.
This light is only ON when the unit is at maximum operating pressure. While in use, the light will turn OFF automatically, indicating
that the boiler is producing steam.
4. Connect the steam hose (10) by inserting the steam hose connector (15) in the steam hose connection outlet (7) and press firmly.
5. Select the desired steam pressure (on the hose handle) between minimum (12), medium (13) and maximum (12 and 13 together).
6. Connect the steam hose (10) to the accessory that you want to use.
7. To release steam, press the steam release trigger (11) on the hose handle.
8. When you are done using your steam cleaner, turn the unit
OFF by pressing on the power button (2).
Turn OFF the main power switch (2A) and unplug the machine. Your steam cleaner is now ready for storage after cool down.
WARNING:
Always turn OFF the main power switch (2A) when leaving the machine unattended.
9. It is safe to leave water in the boiler when the steam cleaner is not in use. If it is for an extended period of time (months),
then it is best to flush out the remaining water. To do so, follow the water removal instructions as outlined in the maintenance
of the boiler section.
8
en