Preparation
1. Read and follow the Safety and Conditions of Use instructions
below. Wear gloves, safety glasses or goggles and long sleeves.
Provide good ventilation and eliminate all sources of ignition.
2. Shake can vigorously for 1 minute before dispensing and
between uses.
3.
Gun-applied version:
Invert can and screw foam dispensing gun assembly firmly
onto valve as shown in Figure 2. Screw until finger-tight; do
not overtighten (Figure 3). When changing cans using the foam
dispensing gun, tighten the flow control knob before removing
the empty can (Figure 4). Use
DuPont
™
Great Stuff Pro
™
Foam
Cleaner
to remove any residual foam from the attachment
area before attaching fresh can.
Figure 2
Figure 3
Figure 4
INSTALLATION
Straw-applied version:
Attach the nozzle by twisting it clockwise into the valve.
Outdoor water faucet
Fireplace gas line
Pipe penetration
Sewer plumbing penetration
Electrical wire penetration
Wall-ceiling juncture
Electrical outlet*
Attic hatch
HVAC vent
*Foam should be applied around the edges of the metal box. Do not apply within
the metal box.
