Dupont CORIAN 690, Инструкция по установке

Страница: 3 / 4

DUPONT ™ CORIAN ® FARM SINK (MODEL 690) INSTALLATION
Flat table or
workbench
1
/
16
” (1.5mm) spacers
under front and
back flanges
Clamp plywood pieces
on each inside surface
Measure the
distance between
inside surfaces
2 x 4s
(50mm x 100mm)
1 x 4
(25mm x 100mm)
Plywood
2 x 4s
(50mm x 100mm)
1 x 4
(25mm x 100mm)
2” (50mm) drywall screws
Use at least 9 on each side.
Plywood
DuPont ™ Corian ® Solid Surface Product Fabrication
Page 3 of 4
Figure C-4
Set the sink upside down on a lat table with a
1
/
16
" (1.5 mm)
spacer under the lange. his is to provide a gap for the
silicone when installing the countertop.
Remove the plywood from the cabinet and place them on
each side of the sink. Set the 2 x 4s on the bottom of the
sink and clamp them to the plywood with bar clamps.
Level the 2 x 4s and use the 2" (51 mm) drywall screws to
assemble all 5 pieces as shown in Figures C-6 and C-7.
he 2 x 4s should be placed as far apart as possible to
allow access to the drain hardware. his is critical if a
disposal will be installed.
Figure C-5
Figure C-6
Figure C-7 Side view of sink and cradle