Duplo DP - M300 Скачать руководство пользователя страница 6

Страница: 6 / 115

●Prohibition of Disassembly or Modification

●Caution for Location

WARNING

● Do not modify the machine.

→ Doing so may result in fire or electric shock.

● Do not remove the rear lid, cabinet, or covers from the machine.

→ The inside of the machine contains high-voltage parts, which may cause electric

shock.

WARNING

● Do not place the machine in a humid or dusty area.

→ Doing so may result in fire or electric shock.

● Once the machine is in position, secure in place using the casters.

→ If the machine falls over, this could result in personal injury.

CAUTION

● Before moving the machine, remove the power plug from the outlet.

→ If the cord is damaged, this may result in fire or electric shock.

● Do not place the machine in an unstable position, such as on an unsteady support

or sloping area.
→ If the machine is dropped or falls over, this could result in personal injury.

● Do not place the machine in a place subject to direct sunlight or heating equipment

such as a stove.
→ It may degrade ink quality and affect printing. The machine also may

malfunction.

● Avoid placing the machine in a place subject to high or low temperature or high

humidity.

→ The paper absorbs moisture and it may cause paper jam or creasing.

Содержание DP - M300




















































































































Результаты поиска

Содержание DP - M300

Отзывы:

Duplo DP - M300, Инструкция по эксплуатации, Страница: 6 / 115

Результаты поиска

Содержание DP - M300

Отзывы: