Duplo DP - M300 Скачать руководство пользователя страница 10

Страница: 10 / 115

■

Daily Maintenance

●

How to maintain the machine

Check the machine periodically to maintain its performance.

WARNING

●

Before cleaning, be sure to turn the power off, wait

until the machine cools off and unplug the power
cord. Otherwise, fire or electric shock may occur.

●

Never remove covers on the machine or modify

them.

Do not spill water or any liquid inside of the machine.
It may cause or fire or electric shock. If it happens,
contact our service person.

Clean the exterior in the following procedures.
1. Use soft cloth with water or mild detergent.
2. Wipe the exterior.

Wipe off the liquid with dry soft cloth.

●

Gently wipe off the dust on the glass with dry soft cloth.

●

Gently wipe off the dust on the LCD panel with dry soft cloth. Never use wet cloth. It may cause

damage.

WARNING

●

Never use alcohol or solvent cleaner. It may tarnish

or damage the exterior finish.

●

Do not put diluted petroleum or insecticide.

It may cause fire.

Dust accumulation may cause the machine to malfunction. Clean it once a week.
Contact our dealer as for cleaning of inside of the machine.

Содержание DP - M300




















































































































Результаты поиска

Содержание DP - M300

Отзывы:

Duplo DP - M300, Инструкция по эксплуатации, Страница: 10 / 115

Результаты поиска

Содержание DP - M300

Отзывы: