Duomo SGF 104 Скачать руководство пользователя страница 8

INSURANCE. This device is insured by the SOCIETÀ REALE MUTUA for the PRODUCT’S GENERAL LIABI-

LITY up to a maximum of 1,500,000.00 EURO against damages caused by the device in case of failures 

in functioning. 

WARRANTY. The warranty term is 3 years from manufacturing date, in agreement with the following 

conditions. The components acknowledged as faulty will be replaced free of charge, excluding the re-

placement of plastic or aluminium cases, bags, packing, batteries and technical reports.

The device must arrive free of shipment charges to DUOMO Ltd  

Defects caused by unauthorized personnel tampering, incorrect installation and negligence resulting 

from phenomena outside normal functioning shall be excluded from the warranty.

DUOMO Ltd   is not liable for possible damage, direct or indirect, to people, animals, or things; from 

Made in Italy

 IP64

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT.

This symbol on the product or its packaging to indicates that this product shall not be treated as household 

waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical 

and electronic equipment, such as for example:

- sales points, in case you buy a new and similar product

- local collection points (waste collection center, local recycling center, etc...).

By ensuring this product is disposed of correctly, you will help prevent potential negative consequence 

for the environment and human health, which could otherwise be caused by inappropriate waste han-

dling of this product. The recycling of materials will help to conserve natural resources. For more detailed 

information about recycling of this product, please contact your local city office, your household waste 

disposal service or the shop where you purchased the product.

Important Note:  In some countries of the European Union, the product is not included in the field of 

application of the National Law that applies the European Directive 2002/96/EC and therefore these 

countries have no obligation to carry out a separate collection at the “end of life” of the product.

In accordance with its continuous development policy, DUOMO (UK) Ltd  reserves the right to modify its 

products and datasheets without notice.

Telephone: +44 1905 797989 - email: [email protected] - website www.duomo.co.uk

5 The Furlong Berry Hill Industrial Estate Droitwich, Worcestershire. WR9-9AH

Содержание SGF 104









Отзывы: