Typical External Wiring Diagram for BX444
Electrical Connection
The sensor can be located up to 100m from the gas
detector. Cable size should be 1mm CSA. If the
sensor cables are run separately in specific conduit it
is not essential to use screened cable but if the cables
are routed through conduit or trunking containing other
wiring the use of screened cable is advisable. The
wiring should be performed by a qualified person in
accordance with current regulations.
Fig.4
Cable Entry Points
The plug in terminal rail makes installation easy and
quick.
Note: It is essential that enough length is left in the
cable loom to allow the facia to be hinged open as
shown in fig (3). The wiring must be checked prior to
powering up the system.
