5
TEMP
MODE
FAN
FAN
UP
DOWN
OFF ON
OFF ON
LOW
HIGH
AUTO
MED
LOW HIGH
AUTO
MED
72
MODE
HEAT STRIP
°F
SET POINT
Comfor
tContr
ol
Comfor
tContr
ol
™
ZONE
2
1
3
ZONE 1
ZONE 1
HEAT STRIP
E. HEAT STRIP MODE OPERATION
(For Duo-Therm air conditioners with an electric heat strip)
1. Momentarily depress and release the MODE push-
button until the
HEAT STRIP
indicator on the LCD is
illuminated.
2. The fan will operate in
LOW, MED
or
AUTO
. You will
not be able to select
HIGH
speed when in the
HEAT
STRIP
mode. Depress and release the
FAN
push-
button to select desired speed. If your vehicle is
equipped with a heat pump or a dual basement air
conditioner system, your selection choice will be
LOW
and
AUTO
.
3. Depress and release the
UP
push-button to increase
the temperature or the
DOWN
push-button to de-
crease the temperature. The final selected
SET
-
POINT
will be displayed in the LCD area of the Comfort
Control Center.
4. The electric heat strip will cycle
ON
and
OFF
per the
temperature
SET-POINT
displayed. The fan will ei-
ther:
a. continue to operate in the selected fan speed or,
b. cycle
OFF
and
ON
with the heat strip if the
AUTO
fan speed has been selected.
5. If your vehicle contains more than one ZONE, depress
the
ZONE
push-button to select
ZONE 2
, and repeat
procedures from Step 1 above. Repeat entire proce-
dure for each additional zone.
COMFORT CONTROL CENTER
SPECIAL CONTROL FEATURES
A. AUTO FAN
When
AUTO FAN
is selected, the fan speed will be deter-
mined by the mode you are in.
1.
COOL MODE
– In the
COOL
mode, which is the air
conditioning mode, the fan will automatically select
the speed depending upon the difference between the
temperature
SET-POINT
and the room temperature.
When that difference is:
8° or more
The fan will operate on
HIGH
4° to 8°
The fan will operate on
MED
4° or below
The fan will operate on
LOW
2. COOL MODE (Heat Pump and Basement units)
–
If your vehicle is equipped with a Duo-Therm Heat
Pump or Basement unit, the fan will automatically
select the fan speed depending upon the difference
between the temperature
SET-POINT
and the room
temperature.
When the difference is:
8° or more
– The fan operates on
HIGH
Less than 8°
– The fan operates on
LOW
3. HEAT PUMP MODE –
When
HEAT PUMP
mode is
selected, the fan will start running in the
LOW
speed.
4. HEAT STRIP MODE
– When
HEAT STRIP
mode is
selected, the fan will start running in the
LOW
speed.
5. FAN ONLY MODE
– In the
FAN ONLY
mode, the fan
will start running in the
LOW
speed.
B. REFRIGERANT COMPRESSOR TIME DELAY
A time delay of approximately two minutes occurs any
time the compressor is required to begin the cooling or
heat pump cycle.
C. POWER INTERRUPTION
In the event that power to the air conditioner or control is
interrupted, the system will restart with the same set-
tings you have previously set.
D. ZONE CONTROL
Your Duo-Therm Control Center will operate cooling and
heating appliances which your vehicle manufacturer has
designed to heat or cool different areas (
ZONES
) of your
RV. The Comfort Control Center will advise you if your
vehicle has multiple
ZONES
, by showing
ZONE 1, 2 3
or
