38
GB
> Do not put the equipment into operation or stop its operation immediately and no longer
use it if it is damaged.
2A
DANGER:
> Pull the connection plug out when not in use, before any cleaning work or
in the event of malfunctions, hazardous situations or damage to the power cable from
the 12 V socket.
> To avoid overheating and short-circuits, only connect the equipment to a 12 V socket that
has been installed properly. Before connecting to the mains supply, check that the type of
current and mains voltage correspond to the specifications on the equipmentʼs type plate.
> To avoid overheating, keep all the equipment openings clear during operation. Do not
seal the openings and do not cover the equipment. Keep the air intakes free of all objects
that could be suctioned in.
2A
CAUTION:
The equipment becomes hot at the fill hose during operation. To avoid
burns, do not touch the hot surfaces. There is a risk of burning following contact with
hot surfaces.
2A
WARNING:
Do not use the equipment during driving.
2A
DANGER:
> Do not work with the equipment in a potentially explosive environment
which contains combustible liquids, gases or dusts.
> Make sure that no sand, dirt or small foreign objects get into the air inlet or air outlet
openings.
> Switch the equipment off and pull the connection plug out of the 12 V socket if: you are
not using the equipment, you leave the equipment unattended, you are carrying out
cleaning work, the power cable is damaged or following the ingress of foreign objects or
the occurrence of abnormal noises.
Содержание FILL&GO
Страница 12: ...41 GB 1a 1 2 4 6 5 3 8 9 10 7a 7 7b 11 ...
