DTSL3/FR MKII USER’S MANUAL
16
Chapter
Chapter
Chapter
Chapter 5
5
5
5 ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT
Level
Level
Level
Level adjustment
adjustment
adjustment
adjustment
:
-By using a level bar and the horizontal pipe and adjusting the adjustment screws at tow sides of the base plate.
-If platform unevenness is resulted from basic unevenness, use iron block to fill up the low place.
-After level adjustment, insert the central expanded nail of ground bolts and use heavy hammer to hammer it.
-Screw down the ground bolts cap.
When the expiry date on the maintenance of concrete hasn’t arrived, one can not install the central expanded nail of ground bolts.
The gap between the base plate and ground after adjustment must be filled with iron plate or concrete.
No
No
No
No load
load
load
load of
of
of
of main
main
main
main machine
machine
machine
machine test:
test:
test:
test:
-Turn on the power QS of "MAIN SWITCH".
-Press “UP” button, pay attention to the synchronization and placidity of the lifting.
-Check and ensure there are no leakage on the oil line .
When testing the lift, no person or other things are allowed to stand or be put near the two sides and beneath the machine. If any
abnormal is found, press button “
EMERGENCY
EMERGENCY
EMERGENCY
EMERGENCY STOP
STOP
STOP
STOP
” to stop it immediately. After clearing obstacles, do the test again.
Load
Load
Load
Load of
of
of
of machine
machine
machine
machine test:
test:
test:
test:
-Drive the vehicle whose weight doesn’t exceed maximum lift weight to the platform, and then the driver leave it.
-Put the lift rubber cushion on the platform.
-Press ‘UP’ button, lift the platform and pay attention to the synchronization and placidity of the lifting.
-Check and ensure no oil leakage.
When beginning load of machine test, no person or other things are allowed to stand or be put near the two sides and beneath the
machine.
Test vehicle whose weight doesn’t exceed maximum lift weight.
Check and ensure there's no leakage on oil line. If any abnormal is found, press button "
EMERGENCY
EMERGENCY
EMERGENCY
EMERGENCY STOP
STOP
STOP
STOP
" to stop it
immediately. After clearing obstacles, do the test again.
Picture 23
All manuals and user guides at all-guides.com
all-guides.com
