Press the "A" button for 3 seconds to exit programming mode.
6.2.5 - Implementation of a program
To run a program, press the "A" button. Use the "UP" or 'DOWN' to select the desired program.
The program runs automatically and cyclically from the first to the last scene.
To stop a running program, press the "A" button again.
If you use the sliders 'cross' and 'stand', you can adjust the internal synchronization between the projectors and adjust
the brake time between scenes.
During the execution of the program, you can still manually control the projectors, even if these projectors are
controlled in the program. When the program is activated, press the "B" and select the projector with buttons "UP" or
"DOWN". As to altering the value of a slider, take control of the projector that will no longer be dependent on the
program. If you use the buttons "UP" or "DOWN", you can control multiple projectors.
Press the "B" button to select another program.
To deactivate the manual control of the projectors, press the "B" button twice. When display a "-" in the display of
"PROJ.".
Press the "UP" or "DOWN" to see if more projectors are still in manual control.
