Ve
nt
K
it
(
O
pt
io
n)
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
Dundalk LeisureCraft
Vent Kit Assembly Instructions
(Optional)
Drill inlet holes centered underneath the heater.
(if sauna is being installed with a wood heater,
drill close to the side of the heater)
* A 2” diameter hole saw was used in pictures but
more holes with a smaller drill size will also work)
31
Install the other Stainless Vent cover over the
outlet holes on the outside using 1-1/2” stainless
steel screws. (6pcs)
On the wall away from the heater, close to the
top, drill the outlet holes in the same manner as
the previous step
Install the cedar vent cover over the outlet holes
on the inside of the sauna with a 1 ½” screw.
* Tighten screw enough that the vent cover
still rotates smoothly.
Install 1 of the stainless steel vent grills over the
inlet holes on the outside of the sauna centered
over the holes using 1 ½” screws. (6pcs)
