El
ec
tr
ic
H
ea
te
r I
ns
ta
lla
ti
on
(
O
pt
io
n)
Using the template provided, drill four 9/64" holes
to fasten the heater to the wall.
Install the two ¼" x 1 ½" (6mm x 38mm) hex head lag screws
(supplied with the heater) into the upper two holes.
Tighten these screws until their heads are about 1/4" (6mm) from
the wall.
Measure the proper distances for the heater template according
to the heater manufacturers instructions.
The following installation instructions are for the Helo Cup (Saaku) electric heater.
Always refer to the original sauna heater manual for confirmation.
Always Read all instructions carefully.
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
20
Hang the heater on the two upper screws.
Install the two ¼" x 1" (6mm x 25mm)hex head lag screws
(supplied with the heater) into the two lower mounting holes.
Level the heater and tighten all 4 hex head lag screws to lock the
heater in place.
Dundalk LeisureCraft Eagles Nest
Outdoor Sauna
Assembly Instructions
