Duncan Vapor Trail Deluxe, Руководство пользователя

Страница: 8 / 24

recordings. Your wet signal will come from the rear
Wet Insert Jack, again with a TRS connector. The
standard Output Jack on the end of the Vapor Trail will
be the Dry send. Note in this setup, the Mix knob has
no effect on the dry signal going to the Insert Jack or
Output jack. It only controls the wet signal at the main
output jack. Blending will be controlled by the level of
your stereo amps or channel faders.
Output Jack
Run a cable from here to your amplifier or the next pedal
on your board
Power Jack
Apply 9 -18V, 150mA minimum, Use a plug with 2.1mm
internal diameter, center negative.
TRS Expression Control Jack
The expression pedal can control all the knob parame-
ters except for mode. When the expression pedal is at
either extreme, any pot moved will be recorded as the
value for that extreme (low or high).
NOTE: For best results if the expression pedal has an
adjustment pot, we recommend that it be set to the
lowest setting.