manualshive.com logo in svg

Duncan Renovator AS6100, Руководство пользователя

Поделиться
Скачать
Duncan Renovator AS6100 Скачать руководство пользователя страница 5

3

Pt. No. 67450

Issue 1020

Description of Machine

The Duncan ‘Renovator AS6100’ is a Coil Tine T-boot 
drill and is fitted with disc openers.
The large split hopper is mounted on a robust centre 
frame.
Sowing depth is  hydraulically controlled. The quality 
European air metering units handle all seeds from turnip 
and rape through to peas and maize and permits easy 
calibration. The seeders are driven via a radar ground 
speed proportional electric drive system. Seeding ceases 
automatically when the machine is raised into the 
transport postion.
The wings may be hydraulically folded up for legal 
tranport width.

Working Principle

The air flow, metering units and electric drive system  
are easily set to give the desired sowing and/or fertilizer 
rate. The front disc precuts the ground surface followed 
by the coil tine and T-boot which creates the seed bed. 
Air delivers seed down the flexible tubes between the 
seeder and tee-boot units and drops into the prepared 
seed bed.

Содержание Renovator AS6100






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды