manualshive.com logo in svg

Duncan Renovator AS6100, Руководство пользователя

Поделиться
Скачать
Duncan Renovator AS6100 Скачать руководство пользователя страница 41

39

Pt. No. 67450

Issue 1020

Maintenance Schedule (continued)

5  Fan Hydraulic Motor

 

Hydraulic Fan -connect the hoses in the following order:

 

First - connect Zero pressure Case Drain 3/8” hose 
(1/2” BSP  Female QR) to hydraulic reservoir *

 

Second -connect Motor Return 3/4” hose (3/4” BSP 
Female QR) to tractor high flow low pressure return 
port.

 

Finally - connect High Pressure Motor feed 1/2” hose 
(1/2” BSP Male QR) to tractor remote.

 

Disconnect in the reverse order to prevent motor seal 
damage.

 

*The tractor hydraulic reservoir or free drain 
connection must have zero backpressure.

6  Preparing the Machine for Storage.

 

Locate on a dry level surface. The machine should

 

be stored wherever possible so the rams are not  

 

 

supporting any weight. The drive chains should  

 

 

be lubricated with suitable roller chain lubricant before  

 

prolonged periods of storage.

 

It is recommended that maintenance be carried out at  

 

the end of the season, giving sufficient time to obtain  

 

spare parts and/or carry out repairs if required.

 

The seed and fertilizer bins must be completely emptied  

 and 

cleaned.

‘Renovator AS6100’ 

Maintenance & Care

Содержание Renovator AS6100






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды