Duncan Renovator AS4000 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 77

background image

10

SAFETY - General (Continued)

Practice Safe Maintenance

Keep the machine in safe working condition. Routine maintenance
and regular servicing will help reduce risks and prolong the life of the
machine.

General Maintenance

Accidents occur most frequently during servicing and repair. The
following general rules must be followed when maintaining or working
with machinery:

•

All operating and maintenance manuals must be

read before and referred to while using or servicing any

piece

ofequipment.

•

Turn off all machinery power sources and isolate the

machine before making adjustments, doing lubrication,

repairs or any other maintenance on the machine.

•

Ensure that the machine hydraulics are disconnected from

the power source.

•

Wear gloves when handling components with cutting

edges, such as any ground cutting components.

•

Beware of the following hazards when dismantling or maintaining the

    machine:-
    > Hydraulics under pressure
    > Springs under tension or compression

•

It is recommended that you clean the machine with a water

blaster or similar apparatus before commencing

maintenance.

Make Sure the Machine is Well Supported

When machinery is fitted with hydraulics, do not rely on the
hydraulics to support the machine. During maintenance or while
making adjustments under the machine, always lock the hydraulics
and support the machine securely. Place blocks or other stable
supports under elevated parts before working on these.

Electrical Maintenance

Disconnect the electrical supply from the tractor before doing any
electrical maintenance.

Welding

With electronic equipment in modern tractors it is advisable to disconnect
the machine from the tractor, or at least disconnect the alternator and
battery before attempting any welding.

Use Only Genuine Spare Parts

Unauthorised modifications or non-genuine spare parts may be
hazardous and impair the safe operation and working life of the machine.

Excess lubricants must be disposed of safely so as not to become a
hazard.

‘Renovator AS4000’

Safety

«
...
10
11
12
13
14
...
»

Содержание Renovator AS4000














































































Отзывы:

Нет отзывов

Похожие инструкции для Renovator AS4000

Бренд: Ecco Страницы: 4

Бренд: JD Squared Страницы: 15

Бренд: DAPAudio Страницы: 16

Бренд: 3M Страницы: 28

Бренд: Jacobsen Страницы: 6

Бренд: Gardena Страницы: 13

Бренд: lancer Страницы: 12

Бренд: Parker Страницы: 5

Бренд: Bacharach Страницы: 31

Бренд: Backyard Play Systems Страницы: 52

Бренд: Backyard Play Systems Страницы: 19

Бренд: Backyard Play Systems Страницы: 44

Бренд: Bacharach Страницы: 2

Бренд: CAB Страницы: 13

Бренд: CAB Страницы: 30

Бренд: CAB Страницы: 17

Бренд: CAB Страницы: 33

Camping Equipment

Бренд: C. Crane Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды