Duncan KTG-1 Tube, Руководство пользователя

Страница: 7 / 9

How to use with a Duncan Programmable Footswitch
The KTG - 1 Preamp was designed to work equally well for musicians with and without full MIDI
controlled racks. If you aren't set up for MIDI, then the optional Programmable Footswitch will
give you quick and easy stage access to 4 sounds.
To use, make sure the preamp is in green (clean) channel and all boosts and crunch are off
(pushed in), then simply plug the Programmable Footswitch into the "4 Function" DIN jack on the
back of your preamp.
Dip switches inside the footswitch allow you to create the 4 sounds most useful to you. The
footswitch comes pre - programmed for the following:
#1 Button - Green Channel = "Fendery" clean with good presence & depth.
#2 Button - Red Channel = Tight, punchy, dirty rhythm - Fat bluesy lead.
#3 Button - Red Channel with Boost 2 = Hi Gain lead, smooth, rich in harmonics and lots of
sustain.
#4 Button - Red Channel with Boost 1, Boost 2 and Crunch Super gain over the top lead with bite
and full - tilt distortion. Refer to page 2 for charts showing control settings.