F U Z Z S E C T I O N
Turn on your amp and engage the pedal. Bring up the Level control until the volume is
at an ideal level. You should hear an overdriven tone with no additional effects. Adjust
the Gain (Fuzz) control to a desired distortion level. In general many of the modulation
effects will be more dramatic at higher gain settings, so we recommend you start by
setting the Gain high, then adjust it to a lower setting if you prefer. The gain control
should range from almost clean with a hint of drive to a massive square wave fuzz
tone. Please keep in mind that the volume of the pedal can noticeably increase as you
increase the Gain.
3
