2
I N I T I A L S E T U P
Power the FOOZ with a 9v DC (center negative) power supply capable of providing at
least 100 milliAmps. Connect your instrument to the input jack and send the output to
your amplifier, mixer, or interface. If you have an expression pedal you can connect it to
the expression input at this time.
FOOZ can produce extreme frequencies at high volumes in some settings. Make sure
to set the Level control to ‘0’ before powering on your amplifier (or other device) and
engaging the effect.
We suggest starting by setting all controls except for Level at noon. Set Level fully
counterclockwise. Set the Tremolo switch, the Filter Type, and Filter Control switches
to ‘OFF’. You should also check the dipswitches on the back of the pedal to make sure
they are all set to ‘OFF’.
