4. A.C. Convenience Outlets:
These outlets let you plug in other equipment for a.c. power. They
can supply a total of 700 watts. To find out how much wattage your equipment uses, look on the
back of the unit, where the power cord is located. Your
Convertible 2000
uses 480 watts.
- NEVER PLUG IN UNITS THAT DRAW MORE THAN A TOTAL OF 700 WATTS, OR YOU
WILL RISK THE POSSIBILITY OF AN ELECTRICAL FIRE.
5. Effects Loop:
Use this circuit with your effects for the least amount of his& Plug your guitar
into the guitar input jack and run your effects through the Effects Loop.
The "Send Level" control lets you match the Effects Loop output to the input of your effects.
When the level is set too low, too much hiss will come through the speaker and the volume will be
low.
When the level is set too
high,
you will overload the affect input and cause too much distortion.
Experiment with the setting to find the best match for your effects.
'Effects
Send"
should be connected to the input of your effect using a normal guitar cable.
"Effects Return" should be connected to the output of your effect using a normal guitar cable.
You want the signal to come OUT of your amp INTO the effect and OUT of the effect INTO
your
amp.
