Duncan 2 Humbucker, Установка курса

Страница: 10 / 13

© 2020 Seymour Duncan 10
Using a Reamer
If the 3/8” (4.3mm)shaft of your new 25k pots are
too large for your guitar’s holes, you will need to
widen the holes. We recommend using a set of
calipers and a reamer to reduce the risk of over
widening the hole or ruining your guitar’s finish.
VWITH CALIPERS
• Measure the width of the included 25k pot.
• Use this meaurement to mark the reamer with
a Sharpy.
• Insert the reamer in the pot hole and slowly
turn clockwise.
• Stop once you’ve reached the marking on the
reamer.
WITHOUT CALIPERS
• Press the reamer into the pot route
• With moderate downward pressure, slowly
turn the reamer clockwise.
• After every few turns, check to see if the 25k
pot fits into the widened route.
• Repeat until the pot fits easily in the route
without extra play in any direction.