5
display the actual temperature.
DX-154.396K
Light
Control the interior light ON/OFF
RUN
When it’s ON, the cooling system runs.
Power
control this appliance turn on/off. ( press and hold this buttons for approximately
3 seconds);
“Set Upper” BUTTER
The temperature setting can be adjusted from 5 to 18 (41 to 65 ).
When pressing this button, the system will be entering the set up mode in the upper
compartment automatically. The LED will flashing and display the setting temperature.
Press once the button, the temperature will decrease 1
(or 1 ). When exceeding the
minimum value that can be established, it will jump to the highest adjustable temperature
value automatically. After stopping pressing the button for 5 seconds, LED figure will
stop flash, then revert back to display the temperature of the upper compartment.
“Set Lower” BUTTER
Set up the temperature in lower compartment: The temperature setting can be adjusted
from 5 to 18 (41 to 65 ).
When pressing this button, the system will be entering the set up mode in the upper
compartment automatically. Setting details same as above.
“Upper chamber”
Display the actual temperature in upper compartment.
“Lower Chamber”
Display the actual temperature in lower compartment.
After the unit is unplugged, the system will return to acquiescence temperature, which
setting by factory. The acquiescence temperature as below:
Upper compartment: 7
Lower compartment: 12
If want reveal every indoor setting temperature, please corresponding to press " Set Upper
" or " Set Lower " button, the LED will flash and display the setting temperature. After
stopping pressing the button for 5 seconds, LED figure will stop flash, then revert back to
display the actual temperature.
