system
malfunction
from
handling
during
transportation.
Remove the contents from the racks and all moving
parts from inside.
Raise the adjustable legs up to the base to avoid
damage.
Tape the door shut and lock it if with a lock system.
Transport the wine cellar only in the upright position.
Also protect the outside of the appliance with a
blanket or similar item.
ENERGY SAVING TIPS
Should the unit be left empty for long periods of time,
it is suggested that the appliance is unplugged, and
after careful cleaning, leave the door ajar to allow air
to circulate inside the cabinet in order to avoid
possible condensation, mold or odors forming.
Opening the door for long periods can cause a
significant increase of the temperature in the
compartments of the appliance.
The appliance should be installed in the coolest area
of the room, away from heat producing appliances,
and out of the direct sunlight.
Ensure that the unit is adequately ventilated. Never
cover air vents. Clean dust and dirt from the
condenser at regular intervals.
Only open the door for as long as necessary and for
as short a time as possible.
Store the content in an organised way.
Do not over-fill the appliance to allow air to circulate.
PROBLEMS WITH YOUR APPLIANCE
You can solve many common problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling customer service.
TROUBLESHOOTING GUIDE (ALL MODELS)
PROBLEM
POSSIBLE CAUSE
REMEDY
Appliance does not
operate.
•
Appliance is not connected to a power
supply.
•
The appliance is turned off.
•
The circuit breaker tripped or a blown fuse.
•
Connect the appliance.
•
Switch on the appliance.
•
Switch on circuit breaker or
replace fuse.
Appliance is not
cold enough.
•
The temperature is not set correctly.
•
The ambient temperature could require a
higher temperature setting.
•
The door was opened too often.
•
The door was not closed completely. Door is
not hermetically sealed.
•
The condenser is too dirty.
•
The ventilation opening is blocked or too
dusty.
•
Check the set temperature.
Set
a higher temperature.
•
Do not open the door more often
than necessary.
•
Close door properly.
•
Check the door seal and clean or
replace.
•
Clean the condenser when
necessary.
•
Clear the obstructions and clean
the dust.
Appliance turns
itself on and off
frequently.
•
The room temperature is higher than
average.
•
A large number of bottles has been added to
the unit.
•
The door is open too often.
•
The door is not closed completely.
•
The door gasket does not seal properly.
•
Put the appliance in a cooler
place.
•
Leave the appliance to work for a
while until the set temperature
has been reached.
•
Do not open the door more often
than necessary.
•
Close door properly.
•
Check the door seal and clean or
replace.
The light does not
work.
•
Appliance is not connected to a power
supply.
•
The circuit breaker tripped or a blown fuse.
•
The light was switched off on the control
panel.
•
Connect the appliance.
•
Switch on circuit breaker or
replace fuse.
•
Switch on the light.
Vibrations.
The appliance is not properly level.
Level the appliance with the
adjustable feet.
