8
OPERATING YOUR APPLIANCE
This appliance is designed for operation at certain
ambient temperatures. The climate class is specified on
the rating plate.
The appliance may not work properly if it is left for a long
period at a temperature outside the specified range. For
example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate.
The range between 5ºC and 20ºC (41ºF and 68ºF)*****
may not be reached.
Climate class
Ambient room temperatures
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
NOTE:
Units with no heater will not raise their internal
temperature if the ambient temperature where the unit is
located is lower than the set temperature.
NOTE:
•
When you use the appliance for the
first time or restart the appliance after
having been shut off for a long time,
there could be a few degrees
variance between the temperature
you select and the one indicated on
the LED readout. This is normal and
it is due to the length of the activation
time. Once the unit is running for a
few hours everything will be back to
normal.
•
If the unit is unplugged, power lost,
or turned off, you must wait 3 to 5
minutes before restarting the unit. If
you attempt to restart before this time
delay, the unit will not start.
USE AND CONTROL
– SINGLE ZONE
The Controls of Your Unit
POWER
To turn the appliance off, press and hold the
key for 5
seconds until temperature display goes out. To turn the
appliance on, press and hold the
key for 1 second until
temperature display lights up.
NOTE:
Pressing the
key once can switch off the
audible alarm when the alarm is on.
LIGHT
Used to turn the inner light on/off.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Display
Display the digital temperature and service indicators.
Indicator Light
The indicator light is located at the right lower corner of
the display. The indicator light will be on when the multi-
key function is selected.
To perform the multikey function, press and hold the first
key, then press the other key for at least 5 seconds and
then release all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or
Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press and hold the LIGHT key for 5 seconds.
Key Lock (Only for models with outside controls) After 2
minutes or longer without pressing any key, the key lock
will be activated automatically. To remove the lock, press
the UP and DOWN keys at the same time for at least 5
seconds and the indicator light will flash three times to
confirm the action.
Setting the Temperature Control
•
The unit has single temperature zone. The
temperature can be set between
5ºC and 20ºC (41ºF
and 68
ºF)***** which is ideal for storing red, white or
sparkling wine.
•
When the unit is plugged in for the first time, the unit
will power up automatically to the preset defaults.
The temperature preset at the factory is 12°C (54ºF).
•
You can set the temperature as required by pressing
the
UP
or
DOWN
key. When you press the two keys
at the first time, the display will show the last
temperature set previously. The temperature will
increase 1°C/1ºF if you press the
UP
key once, or
t
he temperature will decrease 1°C/1ºF if you press
the
DOWN
key once. The display flashes while you
make the setting.
•
After the temperature has been set, the display
shows the current inner temperature.
•
To view the set temperature at any time, press the
UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds. Then
the display shows the current inner temperature
again.
