13
RFHU - Multiuse Operator’s Manual
SETTINGS
Several Settings are available on the RFHU. To enter the Settings menu click on the cog icon ( ) which is
found in the lower right hand corner of the runtime screen.
“Temp Mode” will display an option where the
temperature mode can be changed from the
default of Fahrenheit to Celsius.
NOTE:
Any temperature throughout the control will
display in the selected temperature mode.
RFHU OPERATING INSTRUCTIONS - Continued
The “Menu” option allows you to select the number
Menus (or dayparts) you want to be available (1 to
3).
Menu
Temp Mode
PHU Configurator
When the user loads the “RFHU Config” menu
option within Settings the following screen will
appear.
In the same way as the runtime screen the unit’s
configuration (for example 3X4) will be detected
and displayed.
The PHU config option allows the recipe mapping
of each well to be modified for each menu.
The number in the middle of each zone along with
the color indicates that the individual wells are
within the same temperature zone.
Current well mapping is displayed. For example
“BURG” is selected for both wells in “Zone 1”. The
“CHKN” recipe is selected for both wells in “Zone 2”.
When programming, only recipes with the same
BOTTOM (and TOP) temperature can be configured
next to each other within the same temperature
zone.
