9
RFHU Operator’s Manual - Shelf Control
RFHU OPERATING INSTRUCTIONS SHELF CONTROL- Continued
LABEL EDITING
Selecting the “Label Editor” within the Settings
menu will allow the Zone Name and both the
temperature Sensor 1 and Sensor 2 label names to
be modified which are displayed on the runtime
screen.
After selecting the “Label Editor” the following
screen will appear.
The naming of each of the zones and sensors can be
modified by selecting the appropriate selection.
For example “selecting” the “Name” box will display
the following screen.
The “Zone” label consists of six characters that
can be upper case letters, lower case letters or
numbers. Selecting will save the entry. Both
temperature sensor displays can be changed in
the following way, for example “TOP”/”BOTTOM” or
“LEFT”/”RIGHT”. When modified the runtime screen
and grid display will both be updated with the new
labels. For example:
This is reserved for future use and will allow users to
change the language display on all screens.
LANGUAGE
TOOLS MENU
The user can also be “locked” from editing the unit’s
preset value if desired. This can be achieved by
entering the “Settings menu” followed by the “Tools”
menu.
The following menu options appear under the
“Tools” menu.
