5
Installation and Operation of: Front Line Merchandiser
UNPACKING UNIT
Inspect the shipping carton and/or container,
carefully noting any exterior damage on the delivery
receipt; also note any damage not evident on
the outside of the shipping container (concealed
damage). Contact the carrier immediately and file a
damage claim with them. Save all packing materials
when filing a claim. Freight damage claims are the
responsibility of the purchaser and are not covered
by the warranty.
• Inspect unit for damage.
• Report any dents or breakage to source of
purchase immediately.
• Do not attempt to use unit if damaged.
• Remove all materials from unit interior.
• If unit has been stored in extremely cold area,
wait a few hours before connecting power.
UNPACKING UNIT
Unpack and inspect unit. Remove outer corrugated
box from skid and remove tie down angles from skid
and unit. Set unit on floor.
Note
: Box with bread baskets and kick
plates are inside and under unit.
Remove
Baskets
Kickplates
END GLASS REMOVAL
Step 1
If the unit next to the bread display has an existing
end glass, this will need removed before installing
the bread cabinet.
If not proceed to step 1 of installation.
Step 2
Using a 7/16 wrench and nut driver, remove the
two bolts and nuts holding the end glass in place.
Discard the
bolts
only. (Save nuts for future step.)
NOTE
: be careful not to drop the glass.