Service Manual for
AHPO / EPO Proofer Oven
14
Proofer Thermostat
Bulb
Figure 21. Proofer Thermostat Bulb
It may be necessary to remove the right
side Rack Panel from the inside of the Proofer to pull the
Thermostat Bulb out.
7. Reverse this procedure to install a new Proofer
Thermostat; be careful not to kink the Thermostat Bulb
tubing while installing the new Thermostat.
PROOFER HUMIDITY CONTROL
Disconnect the electrical power to
the unit and follow lockout / tagout procedures.
1. Unscrew the Control Panel; refer to the COVERS AND
PANELS section of this manual for specific instructions.
2. Remove the Proofer Humidity Control Knob.
3. Remove the screws securing the Proofer Humidity
Control to the Control Panel. Retain the screws for reuse.
4. Tag and disconnect Proofer Humidity Control wires.
Proofer
Humidity Control
Figure 22. Location of
Proofer Humidity Control
5. Reverse this procedure to install a new Proofer Humidity
Control.
PROOFER TIMER
Disconnect the electrical power to
the unit and follow lockout / tagout procedures.
1. Unscrew the Control Panel; refer to the COVERS AND
PANELS section of this manual for specific instructions.
2. Remove the Proofer Timer Control Knob.
3. Remove the screws securing the Proofer Timer to the
Control Panel. Retain the screws for reuse.
4. Tag and disconnect the Proofer Timer wires.
Proofer
Timer
Figure 23. Location of Proofer Timer
5. Reverse this procedure to install new Oven Timer.
PROOFER HEAT ELEMENTS
