
DUKE Shake Freezer Model 707PR
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
22
184600
7
Assembly
— continued
Figure 7-5 Head Bushing
10.
Lubricate the inside surface of the
head bushing (2) and place in the
head, making sure to line up the
bushing key into the head slot, as
shown in figure 7-5.
Important:
ALWAYS make sure the head bushing
is positioned in the head properly (see
Figure 7-5). The head is slotted to
match the key on the bushing. Make
sure the key aligns with the slot.
Operating the freezer with a missing
or badly worn bushing will damage
the beater, dispensing head and
cylinder.
11.
Install the dispensing head onto the
freezer by tilting the top of the head
towards you, aligning the studs with
the holes in the head, and sliding
toward the freezer. As you push
the head towards the freezer,
carefully rock it into place, and align
the shaft with the bushing in the
head.
12.
Tighten the hand knobs (15) simul-
taneously, finger-tight only.
Important:
Excessive force will damage the head.
Do not use tools to tighten.
13.
Hook the handle (10) into the slot
on the plunger, then insert the
spindle motor (8) onto the head.
14.
Insert the keeper (11) through the
holes in the handle (10), spindle
(8) and head (1), as far as it will
go.
15.
Plug the spindle motor cord into
the outlet provided in the bottom
of the electrical box and install the
plunger rod (7).