Duke 155131U, Инструкция по установке и эксплуатации

Страница: 14 / 32

Installation and Operation of 5/9 Electric Convection Oven
14
“P” key.
PREhEAT TImE will be displayed then XX:XX. To
change the preheat time, type in a new time. Then
press the “P” key.
To Exit System Programming
SySTEm will be displayed. Press the Up arrow key
and EXIT will be displayed. Then Press the“P” key.
FACTORY PROGRAMMING 3228
Entering Factory Programming And Changing Fac-
tory Settings
Press and hold the “P” for 3 seconds.
PROdUCT CNT will be displayed. Press the down
arrow.
PROGRAmmING will be displayed. Press the “P”
key.
ENTER COdE will be displayed. Type in 3228.
Then press the “P” key.
display will show SySTEm.
Press the down arrow key to FACTORy. Then Press
the“P” key.
mAX PROG TEmP will be displayed, then either
550F or 500F. To change between the 2 settings,
use the Left or Right arrow keys. Then press the “P”
key.
FAN SPEEd TyPE will be displayed, then either 1
SPEEd or 2 SPEEd. To change between the
2 settings, use the Left or Right arrow keys. Then
press the “P” key.
If you change the default setting, the controller will
prompt “Are you sure? Existing recipe fan speed
willb e reset!) Choose yES or NO. Then press the
“P” key.
To Exit Factory Programming
FACTORy will be displayed. Press the Up arrow
key 2 times to EXIT. Then press the “P” key.
PROGRAmmING will be displayed. Press the down
arrow key and EXIT will be displayed. Press the “P”
key.
ADDING PRODUCT AND PRE-ALARM
NAMES, PASS CODE #3228
Programming a Custom Product and Pre-alarm
name
Press and hold the “P” for 3 seconds.
PROdUCT CNT will be displayed. Press the down
arrow key.
PROGRAmmING will be displayed. Press the “P”
key.
ENTER COdE will be displayed. Type in 3328, then
press the “P” key.
SySTEm will be displayed. Press the down arrow
key until either PROdNAmE LIB or ALARm LIB is
displayed.
Press the “P” key and a flashing dash will be dis-
played.
Press the SCAN key and use the number keys to
spell the new word using the arrow right key to go
to the position of the word. Once the word is spelled
press the “P” key and SAvE LIBRARAy Add will be
displayed.
If you press the “P” key again, the word you spelled
will be saved. If you do not want the word, or need
to modify it, press the left or right arrow key to CAN-
CEL or mOdIFy and press the “P” key.
Note: To delete the word and start over, press the
TOGGLE/CLEAR key.
To Exit Library mode
Either PROdNAmE LIB or ALARm LIB will be dis-
played. Press the arrow up or down key until the
display reads EXIT. Press the “P” key.
Exit Factory Programming
FACTORy will be displayed. Press the arrow up key
2 times and EXIT will be displayed. Press the “P”
key.