Dukane SVB031, Руководство пользователя

Страница: 95 / 112

Spin Welder User’s Manual Section 11 – Specifications
Page 85
Page 84
Dukane Manual Part Number 403-547-03 Dukane Manual Part Number 403-547-03
Energy Requirements
Pneumatic
The compressed air supply must be clean and dry.
The acceptable pressure range is 80 psi to 110 psi
(5.5 bar to 7.6 bar).
If the air line contains moisture or oil, install a
pre–filter before the Spin Welder air inlet.
AC Power
The electrical power requirements are 200 to 240
VAC, 3–phase, 60 Hz at 20 AMPS.
3–phase Input Current
3 HP: 12 Amps (2.2kW)
5 HP: 18 Amps (3.7kW)
The spin welder uses three identical AC fuses. One
of the fuses is shown in Figure 11–1. They are each
SLO–BLO type FLNR 20 fuses rated at 250 VAC.
Operating Environment
Operate and store the Spin Welder within these
guidelines.
Oparating:
Temperature:
32° F to 122° F (0° C to 50° C)
Humidity: 5% to 95% Non–condensing
@ 0° C to 30° C
Altitude: 1,000 m (3,300 ft) without derating
Vibration: 1.0 G
Particulates: Minimize exposure to dust, dirt,
smoke and mold.
Storage:
Temperature:
-4° F to 158° F (-20° C to 70° C)
Humidity: 5% to 95% Non–condensing
@ 0° C to 30° C
Vibration: 2.5 G
Figure 11–1
FLNR 250V/20Amp SLO–BLO Fuse