Dukane ImagePro 8038, Руководство пользователя

Страница: 19 / 30

18
LCD Projector User Guide
5. Loosen the two slotted screws on the lamp module bracket.
6. Gently lift and pull up on the metal wire to remove the lamp module.
Caution: Do not touch the glass portion of the new lamp module with
your hands or allow it to touch other objects as this may damage it and
shorten its operational life.
Caution: Do not drop the lamp module as the glass may shatter and
cause injury.
7. Carefully place the new lamp module into the projector, with the glass
portion facing left. Make sure that it is inserted securely and that the two
location holes match the two location pins of the inner engine case. Tighten
the slotted screws.
8. Replace the lamp module door and tighten the screw.
9. Reset the lamp usage counter. See “ To reset lamp hours” on page 15.
Important: The only time that you should reset the counter is after you have
replaced the lamp module.
Cleaning the Projection Lens
1. Turn off the projector and allow it to cool.
2. Remove the lens cap.
3. Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Caution: Avoid using an excessive amount of camera lens cleaner. Do
not use abrasive cleaners, solvents or other harsh chemicals as they
might scratch the lens. Do not spill any camera lens cleaner on the
exterior case as it may fade, deform or melt the exterior case.
4. Lightly wipe the cleaning cloth over the lens.
5. If you do not intend to use the projector immediately, replace the lens cap.