229
9. Using the Viewer (MM Models)
❸
Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar is set to the factory default.
Preparation: Before starting the Viewer, store images to the USB memory using your computer.
Starting the Viewer
1. Turn on the projector. (
→
page
16
)
2. Insert the USB memory into the USB port of the projec-
tor.
NOTE:
• Do not remove the USB memory from the projector while it’s LED
flashes. Doing so may corrupt the data.
TIP:
You can a USB memory insert the projector when the drive list screen
is displayed.
3. Press the “9/USB-A” button.
The screen will change to the viewer display and a screen
showing a list of the drives will be displayed after 2 to 3
seconds.
TIP:
• Press the button to display the viewer with the main body operation.
Refer to page
18
for the selection method.
• For more information about the drive list screen, see page
235
.
• To display graphics in a shared folder, see page
243
; to display still
images or movie files in a media server, see page
247
.
USB