28
3. Convenient Features
❹
Changing Eco Mode/Checking Energy-Saving Effect
Using Eco Mode [ECO MODE]
When the [LIGHT MODE]’s [ECO MODE] is set to [ECO1] or [ECO2], the brightness and the operating sound are
reduced. Furthermore, the power consumption is decreased and the projector’s CO
2
emissions are reduced.
[ECO MODE]
Icon at the bot-
tom of the menu
Description
Status of LIGHT indicator
[OFF]
100% brightness
The screen will be brightly lit.
Off
[ECO1]
Brightness will be at about 80%.
The cooling fan will also slow down ac-
cordingly.
Lower power consumption
Steady Green
light
[ECO2]
Brightness will be at about 50%.
The cooling fan will also slow down ac-
cordingly.
Lower power consumption considerably
To turn on the [ECO MODE], do the following:
1. Press the ECO Button on the remote control to display [ECO MODE] screen.
2. Use the
▼▲
buttons to select, then press the ENTER button.
The [ECO MODE] selection screen turns off and the projector switches to the selected mode.
• When in the [ECO MODE], the LIGHT indicator lights green.
NOTE:
• The [ECO MODE] can be changed by using the menu.
Select [SETUP]
→
[GENERAL]
→
[LIGHT MODE]
→
[ECO MODE].
• The [LIGHT HOURS USED] can be checked in [USAGE TIME]. Select [INFO.]
→
[USAGE TIME].
• After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, the projector goes
into [ECO2] automatically. The projector will return to its original setting once a signal is accepted.
• If the projector inside temperature becomes high caused on the high room temperature, the projector may decrease the brightness
temporarily for protecting itself. This is a protective function called [FORCED ECO MODE]. When the projector is in the [FORCED
ECO MODE], the thermometer symbol [ ] is indicated at the right bottom of the screen. When the projector inside temperature
goes down by cooling the room or setting the fan mode to [HIGH], the [FORCED ECO MODE] will be released and the projector
will be back to the original setting state. During the [FORCED ECO MODE], it disables to change the state by changing the setting
of the [ECO MODE].