The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.
NOTE
• The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
• If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
NOTE
USING THE MAGNIFY FEATURE
FREEZING THE SCREEN
1
Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
2
Press the POSITION button, then use the lever switch
/
,
/
to select the area to zoom. Press the
POSITION button again to finalize the zoom area.
3
Use the lever switch
/
to adjust the
zoom level
Press the MAGNIFY (OFF) button to exit MAGNIFY mode
and restore the screen to normal. (The projector will also
automatically exit MAGNIFY mode if there is a change in the
input signal's state.)
1
Press the FREEZE button
The [II] icon appears and the screen will freeze at
the current image. Press the FREEZE button again
and the [ ] appears as the projector exits FREEZE
mode.
▲
22
DOWN
BLANK
ASPECT
PUSH
LASER
ENTER
ON
OFF
ESC
MENU
RESET
POSITION
MAGNIFY
VOLUME
MUTE
WIRELESS
KEYSTONE
FREEZE
ONE TOUCH
AUTO
PinP
ON
MAGNIFY
POSITION
POSITION
PUSH
ENTER
ON
OFF
ESC
MENU
RESET
POSITION
MAGNIFY
VOLUME
MUTE
WIRELESS
KEYSTONE
FREEZE
ONE TOUCH
AUTO
PinP
FREEZE
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 22
