DUI Weight & Trim Classic, Руководство пользователя

Страница: 20 / 26

wrong weight pocket assembly and it must be
moved to the other side.
4. The two ends of the weight release cables must
be threaded through the two small diameter
grommets located on the front edge of the
weight carrier. See Figure 7.
5. The weight release cables
must pass through each of
the pocket assembly
mounting loops. Pull each
mounting loop through the
grommets and thread the
cable through the loop. See
Figure 8.
6. The ends of the cable should
be placed under the buckle
that attaches the weight
carrier to the waist belt.The ends of
the cable must never be knotted or
tied in any way or the weights cannot be
dropped. See Figure 9.
!! WARNING !!
Do not tie or knot the cable. Doing so could prevent the
cable from moving through the attachment mounting
loops smoothly, making the ditching of the weights
difficult or impossible.
19
Maintenance.........................................
Figure 9
Figure 8
Figure 7