Dugena W 314, Инструкция по эксплуатации и гарантия

Страница: 13 / 21

24 25
English English
2. Initial Setup
(important for correct setting of radio-controlled watch)
Due to heavy shocks or magnetic fields the hand position may differ from
the internally saved radio time. The initial setup serves to resynchronise
the hands with the internally saved radio time.
- Press and hold SET and MODE for 5 seconds.
The second hand stops and the display shows HP
- Now press and hold MODE until the second hand starts to rotate.
Wait until all three hands rotate to just before 12:00. Press MODE
again to stop the hands from rotating. Now press MODE as required
until the second hand aligns with 12:00. All three pointers should now
align with 12:00.
- Press SET. The LCD display shows a flashing numeral.
- Press MODE until the LCD display shows 12.
- Press SET.
The initial setting is now complete. The watch should now receive the
radio signal and set itself to the correct time.
This process will take up to 8 minutes.
3. Checking Radio Reception
The radio clock will attempt to receive the DCF77 radio-control signal
every day between 3:00 am and 4:00 am. However, interference with
reception might occur due to thunderstorms or electrical disturbance. The
antenna icon on the LCD will be on if the reception is successful.
- Press SET.
- If the second hand rotates to 12:00, the reception attempt
was successful.
- If the second hand rotates to 6:00, the reception attempt was
not successful.
- In both cases the LCD display shows the remaining seconds running
down and the watch returns to the saved radio time.
4. Manual Reception Control
A manual call for the transmitter is always possible, but might fail due to
bad weather conditions or electronic devices in the vicinity.
- Press MODE and hold for 5 seconds.