Dufour Fish n Chips 460 GL 2019, Руководство по эксплуатации

Страница: 11 / 20

Σελίδα 11 από 20
Thermal Fuses
Fuses are mechanisms that are inserted into an electrical circuit in order to interrupt
the supply of electricity throughout the electrical installation or in individual circuits
of the installation, when large current values occur due to short circuit or overload to
protect the wiring lines. Are always installed after the circuit breakers and are never
installed in ground conductors. The use of these fuses is as follows:
12V Control Panel / Bilge Pump / Vhf
At the image indicates fuses of 12V.
In case that something doesn’t work,
for example lights, you need to
check one by one the fuses. Also you
will find some fuses under of the
control panel.
Anchor fuse
The image indicates fuse of the Windlass. You will
find it under of the chart table.
The use of these fuses is as follows:
In case the fuse has fallen, you will see a yellow or red
or black plastic protruding downwards, almost
vertically, with the use of your hand (fingers) you
press the yellow plastic upwards so that it reaches a
horizontal position and clicks. Then does an operation
test to find out if everything is working properly.