Dufour Yachts 40 Performance, Руководство пользователя

Страница: 13 / 79

ENGLISH Date: 2009.09.29 Page 13 / 79 Dufour 40 Performance
DANGER
Your boat is delivered without a supply cable or shore connection plug. The cable used must be
designed for exterior use. Its cross-sectional area must be appropriate for its length and the rating
of the main circuit-breaker (see electrical diagram). The plug must be suitable for the socket on the
shore (if necessary, seek the advice of a professional). It should be as close as possible to the
IP 67
/ IEC529 type
In order to minimize the risk of electric shock or fire :
- Switch off the shore supply at the on-board isolator before connecting or disconnecting
the shore/boat supply cable.
- Connect the shore/boat supply cable at the boat end before connecting it to the shore
outlet
- Disconnect the shore/boat supply cable at the shore outlet before dis-connect-ing it at the
boat end
- Close the shore outlet cover properly
- Do not make modifications to the shore supply cable; use only compatible connectors.
Never:
- - Go swimming close to a boat connected to a shore supply socket: danger of
electrocution!
Warning! When the boat is moored at the quayside, set the isolator to the ‘off’ position.
Location of the 220 V master circuit-breaker: by the chart table.
During haul-out maintenance, set to the ‘on’ position in order to have
earth [grounding] protection
via the shore socket.
WARNING
Never let the end of a ship/shore supply cable dangle into the water. It may create an electrical
field that could injure or kill nearby swimmers.