•
press the “
#
” key to exit from event list
or
press “ ” to clear the event list. In this case the keyboard emits some “beep” and the “F1
F1
F1
F1” key
blinks, on display is showed “Alarm Memory” (the alarm event is “queue cancellation”). Press
again “ ” to exit.
ALERT
To enable/disable the Alert function:
•
press the “ ” key and digit the user code (or installer code)
•
Alert change its status: Enabled Disabled or vice versa Disabled Enabled
•
the “ ” key light on (BLUE) if the Alert is enabled, light off if disabled
GSM modem status
To know the GSM modem status:
•
press the “▲
▲
▲
▲” key and digit the user code (or installer code)
•
the following information are shown (scroll the list with the ▼
▼
▼
▼ and ▲
▲
▲
▲ keys):
o
Modem status: signals if the modem works properly
o
Operator: name of GSM operator actually used by the panel
o
Modem signal: GSM signal level
o
(only if configured) Check credit: procedure for remaining credit on the control panel
SIM request, information will be showed on display
•
press the “ ” key to exit
Clearing the “Event Queue”:
“Alert”:
12:40 26/09/11
Alarm memory
12:40 26/09/11
Queue Cancel.
