Duevi DVT-LCD, Инструкция по установке и эксплуатации

Страница: 14 / 20

CONTROL PANEL CONTROL PANEL CONTROL PANEL CONTROL PANEL PROGRAMMIN PROGRAMMIN PROGRAMMIN PROGRAMMING G G G – –– – INSTALLE INSTALLE INSTALLE INSTALLER MENU R MENU R MENU R MENU
Control panel programming is possible ONLY via DVT-LCD keyboards set as “
program
program program
program keyboard
keyboard keyboard
keyboard
”
(see software manual). By factory settings the control panel use the keyboard with address 1 as
programming keyboard.
To program the control panel (only for installer):
1. Press the “ ” key.
2. Digit a
user code user code user code user code
(default user n° 1 code is: 100000):
3. Press the “ ” key, then press the “ ” key.
4. Digit the
installer code
installer code installer code
installer code
(default installer code is: 900000):
5. The installer menu for control panel programming is ready.
Use the directional keys (
►◄
▼▲ ▼▲ ▼▲ ▼▲), numerical keys (0 ÷ 9), “ ” and “ ” to change the control
panel settings.
WARNING! WARNING! WARNING! WARNING!
Only keyboard set as Only keyboard set as Only keyboard set as Only keyboard set as “Program “Program “Program “Program keyboard keyboard keyboard keyboard””””
By factory the control panel uses the By factory the control panel uses the By factory the control panel uses the By factory the control panel uses the
keyboard with address 1 for programming
keyboard with address 1 for programming keyboard with address 1 for programming
keyboard with address 1 for programming....
Refer to installer manual
Refer to installer manual Refer to installer manual
Refer to installer manual and software
and software and software
and software
manual of the control panel manual of the control panel manual of the control panel manual of the control panel!!!!
Insert code:
------
Insert code:
------