Duetech Beres STP Lite Скачать руководство пользователя страница 16

Страница: 16 / 66

STP Lite User Manual Revision 1.02

COM

Relay Output

Digital

Input

Figure 6: Side view of STP Lite

ATTENTION:

Do not force the

STP Lite

onto the DIN rail. Forcing

the device on the rail may crack the black tab or the

STP Lite

casing,

and may seriously compromise the stability of the device.

DANGER:



The device must only be used in rooms that are dry and

clean. Protect the device from humidity, water or heat.



The device must not be used in environments containing

flammable gases, fumes or dust.



Do not subject the device to shock or severe vibrations.

Connecting the GSM Antenna

Screw the GSM antenna (included with the

STP Lite

device) onto

the

STP Lite

's antenna SMA connector.

The antenna serves the same purpose as the antenna of any
cellular phone. The antenna must be attached for optimal
performance of the device.

Black Tab

Содержание STP Lite



































































Результаты поиска

Содержание STP Lite

Отзывы:

Бренды по названию

Популярные бренды

Duetech Beres STP Lite, Руководство пользователя

Результаты поиска

Содержание STP Lite

Отзывы:

Бренды по названию

Популярные бренды